Asked by: Weidong Forcadaasked in category: General Last Updated: 4th April, 2020
How do I reset my Casablanca remote?
- Turn the power off at the circuit breaker.
- Remove the batteries from the handheld remote.
- Change dip switch setting in handheld remote and the receiver.
- Place the batteries back into the handheld remote.
- Turn the power on to fan.
Similarly, how do you reset a ceiling fan remote?
Reset the fan remote If you want to reset the remote: Turn off the ceiling fan using the remote. Wait for about 30 seconds before turning the power on. Within those seconds, hold down the off button on the fan for about ten seconds.
Additionally, why is my fan remote not working? If you are using a remote control, check that the batteries are installed properly and are not dead. Check that the dip switches on the remote and receiver are set to the same frequency. If you're using a wall control, check the power to the breaker from your control and try working your ceiling fan manually.
Beside above, how do I pair my Casablanca Fan remote?
Use the pull-chain switch on the fan to set the fan speed to the HIGH position before operation. To pair the remote to your Casablanca receiver, LONG PRESS the Fan and Light buttons together within three minutes of restoring power to the fan.
How do I turn my ceiling fan on without a remote?
To control a remote-controlled ceiling fan without using the remote, add a pull cord to the pull switch on the motor module. The pull cord can be purchased from a hardware store or garden and patio shop, while the tools needed are already in most households.