Asked by: Sakura Dregertasked in category: General Last Updated: 8th January, 2020
What tools are needed to install Hardie?
Also, what do I cut Hardie board with?
The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you'd cut drywall. In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool.
Subsequently, question is, can Hardie get wet before installing? original packaging. James Hardie siding and trim products must be kept dry at all times prior to installation. If products become saturated before they are installed, the following problems may occur: OPEN JOINTS DUE TO SHRINKAGE If installed wet, joints between planks may open up requiring repair or replacement.
People also ask, what kind of saw blade do you need to cut Hardie board?
To cut this type of siding, use a masonry blade. Masonry blade types include abrasive materials or vented diamond blades that are used for dry cutting. The blades are designed to be used with most cutting tools, including circular, table and miter saws.
Can you screw into Hardie board siding?
Although the siding does not require drilling pilot holes, you may need to run wire or cable through the siding, necessitating drilling a hole. While HardiePlank siding offers durability, it easily breaks; therefore, drilling through it requires proper tools and techniques.